Plan Your Route Like a Pro: Weather, Detours, and “Plan B”
Check official state DOT and highway apps for live road conditions, closures, and chain controls before you leave and at each fuel stop. Pair those with a forecast tool that shows hour-by-hour precipitation and wind along your route so you can shift departure by a few hours if a front is moving through.
Build a delay buffer: for snowbelt corridors, add 25–35 percent to your drive time and pre-identify safe stopovers every 60–90 miles where you could warm up, eat, and refuel. Save an offline map for the full route and a secondary route, then share a simple itinerary with a contact: vehicle description, plate number, planned stops, check-in windows, and your emergency contacts. Keep those numbers in your phone and in the glove box on paper in case the batteries or service fail.
Traction Action: Tires, Chains, and Pressure
Winter tires use softer rubber and denser tread that stay pliable below about 45° F; all-season compounds harden in the cold, which lengthens stopping distances. If you drive through mountain passes that require traction devices, match the chain or cable size to the exact tire code on your sidewall and do a practice install at home with gloves, a kneeling pad or tarp, and a headlamp. Confirm you have enough fender clearance after installation. Check tread depth; for winter driving, 6/32 inch or more is a safer target than the bare minimum of 2/32. Cold air shrinks, so tire pressure drops about one psi for every 10° F decrease in temperature. Check pressures “cold” and inflate to the driver-door placard, not the sidewall max. Don’t forget the spare and the jack points.
See and Be Seen: Visibility Gear
Use winter-blend washer fluid with a de-icer that is rated to the expected lows. It resists freezing in the reservoir and lines. Replace streaky wiper blades and consider winter blades with a protective boot that sheds ice. To check headlight aim, park 25 feet from a wall on level ground, measure from the ground to the center of each low beam, mark that height on the wall with tape, and confirm the beam cutoff is even and just below the marks. Carry reflective triangles; set one about 10 feet behind the vehicle, another around 100 feet, and a third farther back on high-speed roads to create a cone of visibility without the fire risk of flares.
The Cold Kit: Supplies That Save the Day
Pack a warm blanket or sleeping bag for each traveler, a folding shovel, and sand or non-clumping kitty litter for traction under drive wheels. Add booster cables or a jump pack, a compact air compressor, non-perishable snacks, water, and a headlamp with spare batteries. Include a phone power bank, a multi-tool, a basic first-aid kit, chemical hand warmers, and a bright knit hat so you’re visible if you exit the car. Tuck in a paper map for the ultimate offline backup if GPS and phones go dark.
Policy Pit Stop: Coverage You’ll Want
Review towing and roadside assistance before you go. Some policies limit mileage or exclude winching from a ditch. Verify whether rental reimbursement applies if repairs strand you mid-trip. Comprehensive covers hazards like hail, falling branches, animal strikes, and vandalism; many carriers offer separate glass coverage with a lower deductible for windshield repair. After a winter fender-bender, move to a safe spot, set out triangles, photograph damage and the road surface, exchange information, and contact your insurer or agent for next steps.
Map Your Coverage Before You Map Your Drive
A quick policy review ensures you’re covered from first flurry to final mile. Please message your local Illinois agent to confirm roadside, rental, and comprehensive protections fit your route and risk.
Filed Under: Personal Insurance | Tagged With: Car Insurance